How To Setup Microsoft Skype for Business Server SIP Trunking

About

This article demonstrates step-by-step instructions for configuring Microsoft Skype for Business Server SIP Trunking.

Step-by-Step Instructions

The below table will detail the steps required to accomplish your goals:

Product Features

Local & Toll-Free Origination

Inbound calling to any SIP ready device.

Domestic & International Termination

If it has a working phone number, we can dial it. Outbound calling to any destination.

Skype for Business SIP Trunking

Certified SIP origination and termination for Skype for Business server.

Phone Numbers in Over 60 Different Countries

Have offices around the world? No Problem! Choose from over 60 different countries to purchase local numbers from.

Pool Phone Lines

Have office around the world? No Problem! Choose from over 60 different countries to purchase local numbers from.

Routing Rules

Use Routing Rules to execute complex call routing.

Fax/t38 Support

Use your SIP Trunks to send and recieve Faxes through Circuit ID.

CNAM

Add on outbound CNAM for just .1 cent per lookup.

Call Recording Available

Add-On Call Recording to record ALL calls to and from your Organization.

GEO Location

Circuit ID can use your location to Automatically your calls to the best location for the best call quality.

12345

Topology Builder

The first step to configuring Skype for Business SIP Trunking is to add the PSTN gateways. Unfortunately, this can only be done via the Skype for Business Server Topology Builder.

Once you have added the PSTN gateways, you can complete the remaining setup by running the Skype PSTN Connector Powershell Script in Step 4.

So let’s get started! Open the Skype for Business Topology Builder if you haven’t already done so as shown in Exhibit 1.

Exhibit 1

Microsoft Skype for Business Server Topology Builder Start Menu Icon

Add PSTN Gateways

2A. Expand the site where you would like to configure Skype for Business SIP Trunking, then Shared Components. Next, right-click PSTN gateways and click “New IP/PSTN Gateway” to start the wizard as shown in Exhibit 2A. Enter the PSTN Gateway Hostname Address as shown below under Localized Termination URIs and click Next.

2B. Select the listening IP addresses for your mediation server (default is applicable in most cases) as shown in Exhibit 2B and click Next.

2C. Change “Listening port for IP/PSTN gateway” to 5060, “SIP Transport Protocol” to TCP, “Associated Mediation Server port” to 5060 as shown in Exhibit 3, and finally click Finish.

Repeat steps 2A through 2C for all PSTN Gateways listed below:

Localized Termination URIs

Region	Hostname
US East (Virginia)	useast.pstn.circuitid.com
US East 2 (Ohio)	useast2.pstn.circuitid.com
US West (California)	uswest.pstn.circuitid.com
EU (Ireland)	euwest.pstn.circuitid.com
Asia Pacific (Singapore)	apsoutheast.pstn.circuitid.com

Exhibit 2A

Skype for Business Topology Builder New PSTN Gateway Wizard

Exhibit 2B

Skype for Business Topology Builder New PSTN Gateway Wizard Step 2

Exhibit 2C

Skype for Business Topology Builder New PSTN Gateway Wizard Step 3

Publish Topology

Publish your Skype for Business topology to commit and save your PSTN gateway changes and ensure that your Skype for Business Mediation server is up to date with your topology.

You can check your Mediation server’s topology status by running the below command in the Skype for Business Management Shell utility and checking the value of “UpToDate” for your mediation server role. If it is set to True, proceed to Step 3, otherwise if False, continue to Step 3 only when this value has changed to True.

Get-CsManagementStoreReplicationStatus

Run Skype PSTN Connector Powershell Script

Download, unzip and run the Skype PSTN Connector Powershell Script on your Frontend or Mediation server. This can be done by executing the below command in the Skype for Business Management Shell to complete setup.

Note that the Skype PSTN Connector script will configure your Skype Server to connect with our gateways, normalization rules for dialing and SIP Trunking redundancy across 5 geographically disbursed locations.

cd "[Directory where you unzipped the SkypePSTNConnector.ps1 file]"
./SkypePSTNConnector.ps1

Also, note that you can open the Skype PSTN Connector Powershell Script in your favorite editor to review the commands it will be running. This will allow you to extract a subset of commands to execute if you are merely adding us on as an additional SIP Trunking provider.

Firewall Configuration

Almost done!

Open the following ports on your firewall to Circuit ID SIP and Media IPs:

Service	Port	Protocol
SIP Signalling	5060	TCP
Media	10000 thru 20000	TCP/UDP

That’s it, stick a fork in it, you’re done! You can now make and receive calls utilizing today’s most robust Skype for Business PSTN network.

Conclusion

Congratulations! You have now completed the "How-To Setup Microsoft Skype for Business Server SIP Trunking" article and we hope that you have accomplished the goals you set out to achieve. However, if for any reason you may still require assistance with setup, simply login to the Management Portal and submit a support request.